DHC-96, DCB, DM45, CC / CV / CW — digital panel instruments and measuring transducers
Country: Spain · Model: DHC-96 / DCB / DM45 / CC / CV / CW
DHC-96, DCB, DCP-96 and DM45 digital panel instruments and transducers of the CC, CV, CW/CY and CPF series show electrical quantities on the panel and pass them to automation. DHC-96 has a 96 × 48 mm format, and CC-A converts a 1 or 5 A AC current into a standard signal. They are used on substation panels, in telemechanics and SCADA.
- DHC-96
- panel 96×48 mm; AC or DC parameters (shunt), process signals; 2 relays, 2 digital inputs, 20 mA analogue output; RS-485 Modbus/RTU; IP54
- DHC-96 CPM 1500
- DC ±150…1500 V, shunt 50–600 mV; V, A, kW, kWh DC
- DCB, DCP-96, DM45
- digital indicators in various formats
- CC-A
- AC current transducer (1/5 A) → 4–20 mA / 0–10 V; accuracy 0.2 % of full scale; insulation 3 kV, impulse 4 kV
Technical specifications
| DHC-96 | panel 96×48 mm; AC or DC parameters (shunt), process signals; 2 relays, 2 digital inputs, 20 mA analogue output; RS-485 Modbus/RTU; IP54 |
|---|---|
| DHC-96 CPM 1500 | DC ±150…1500 V, shunt 50–600 mV; V, A, kW, kWh DC |
| DCB, DCP-96, DM45 | digital indicators in various formats |
| CC-A | AC current transducer (1/5 A) → 4–20 mA / 0–10 V; accuracy 0.2 % of full scale; insulation 3 kV, impulse 4 kV |
| CV / CW / CY / CPF | transducers for voltage, power, cos φ, frequency |
| CC-A supply | 115/230/400 V AC (−15…+20 %), 2.5 VA |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
DHC-96 shows on the screen the measured electrical quantity or a proportional value of a process signal, depending on the model. Two relay outputs make regulation and control possible, and there are also 2 digital inputs, a 20 mA analogue output, RS-485 Modbus/RTU and protection degree IP54. For DC systems there is the DHC-96 CPM 1500 for ±150, 300, 600, 1000 and 1500 V DC with current through a 50–600 mV shunt; it shows voltage, current, power and energy. The CC-A Out2 transducer accepts 1 or 5 A AC within 0–150 % In, withstands 300 % In continuously and consumes 0.2 VA. The outputs are 0–20 / 4–20 mA or 0–5 / 0–10 V, with an accuracy of 0.2 % of the upper limit for the RMS value of a 50 Hz signal. The supply is 115/230/400 V AC (−15…+20 %), 40–90 Hz, 2.5 VA. The insulation withstands 3 kV 50 Hz for 1 min, and a 4 kV impulse (1.2/50 µs).
How to choose
The instrument type depends on what exactly you measure. Output the current from a current transformer through CC-A, and voltage, power, cos φ and frequency through CV, CW/CY, CPF. For DC networks up to 1500 V take DHC-96 CPM 1500. If you need a network analyser with harmonics up to the 31st, look at CVM-C10 / C11.
Request a price and lead time
DHC-96, DCB, DM45, CC / CV / CW — digital panel instruments and measuring transducers. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What is the format of DHC-96 panel instruments?
The format is 96 × 48 mm. There are 2 relays, 2 digital inputs, RS-485 Modbus/RTU and IP54 protection.
What DC voltages does DHC-96 CPM 1500 measure?
Networks of ±150, 300, 600, 1000 and 1500 V DC, with current through a 50–600 mV shunt.
What output signals does the CC-A transducer have?
0–20 / 4–20 mA or 0–5 / 0–10 V, accuracy 0.2 % of the upper limit. Input 1 or 5 A AC.
What supply does CC-A need?
115/230/400 V AC with a tolerance of −15…+20 %, frequency 40–90 Hz, consumption 2.5 VA.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.