YTA70P Temperature Transmitter
Country: · Model: YTA70P
The YTA70P is a panel-mount temperature transmitter for DIN rail mounting. It accepts a thermocouple, RTD, ohm or DC millivolt input and converts it into a 4 to 20 mA DC signal. The HART protocol is supported.
- Date
- Remarks
- 2024/12
- Important Notice for Safe Use of Products
Technical specifications
| Date | Remarks |
|---|---|
| 2024/12 | Important Notice for Safe Use of Products |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The transmitter sits on a standard DIN rail inside the cabinet, so the sensor can stay in the field while the signal conditioner is placed next to the controller. One and the same unit handles a thermocouple, an RTD, a resistance in ohms and a millivolt signal, which shortens the spare parts list. The output is a standard 4 to 20 mA DC signal that any PLC or control system accepts. The HART protocol adds a digital channel for configuration and diagnostics without breaking the loop. The specification lists an important notice for safe use of the products dated 2024/12, which should be read before installation.
How to choose
For the YTA70P, first confirm the primary sensor type, thermocouple, RTD, resistance or millivolts, since the input setup depends on it. The 4 to 20 mA DC output suits most controllers, and HART is needed if you want to configure the unit remotely. Accuracy is not given in the data and depends on the sensor type, so check it in the documentation. For field mounting without a cabinet, a different type of transmitter is required.
Request a price and lead time
YTA70P Temperature Transmitter. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
Which sensors can be connected to the YTA70P?
Thermocouples, RTDs, ohm sources and DC millivolt signals.
What output signal does the YTA70P have?
A standard 4 to 20 mA DC current signal. It can go to a PLC, a controller or a recorder.
How is the YTA70P mounted?
On a standard DIN rail in a cabinet, as it is a panel-mount type.
Does the YTA70P support the HART protocol?
Yes, HART is supported. It makes it possible to configure and diagnose the unit over the same current loop.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.