FN510 Field Wireless Multi-Function Module
Country: · Model: FN510
The FN510 is a field wireless multi-function module that, together with the FN110 communication module, sends sensor data into the field network. It has a 0 to 25 mA current input, contact inputs and a vibration sensor input, a 500 g polycarbonate housing and IP66 and IP67 protection.
- Power supply
- Power supply to the FN120. Supply voltage: 3.5 V. Supply current: 50 mA. Power supply to sensors [measurement code: A] none [measurement code: C] see Table 2
- Ambient humidity limits
- Operating: 0 to 100%RH (non-condensing). Storage: 0 to 100%RH (non-condensing)
- Ambient temperature gradient
- Operating: ±10 °C/h or less. Storage: ±20 °C/h or less
- Vibration resistance
- 0.21 mm P-P (10 - 60 Hz), 3G (60 - 2 kHz)
Technical specifications
| Power supply | Power supply to the FN120. Supply voltage: 3.5 V. Supply current: 50 mA. Power supply to sensors [measurement code: A] none [measurement code: C] see Table 2 |
|---|---|
| Ambient humidity limits | Operating: 0 to 100%RH (non-condensing). Storage: 0 to 100%RH (non-condensing) |
| Ambient temperature gradient | Operating: ±10 °C/h or less. Storage: ±20 °C/h or less |
| Vibration resistance | 0.21 mm P-P (10 - 60 Hz), 3G (60 - 2 kHz) |
| Shock resistance | 50 G, 11 ms |
| Canadian safety standards | CAN/CSA-C22.2 No.61010-1 CAN/CSA-C22.2 No.94.1, CAN/CSA-C22.2 No.94.2 IEC 60529 |
| Degrees of protection | IP66, IP67 and Type 4X apply when the connector is properly tightened. |
| Explosion protected types | FM (United States or Canada), ATEX, IECEx intrinsically safe approval |
| Housing material | Plastic (polycarbonate) |
| Weight | 500 g (without mounting bracket, clamp and battery) |
| Input signal | 0.1 to 3.2 V |
| Range | 0 to 25 mA |
| Internal shunt resistor | 10 Ω |
| Accuracy | ±16 uA |
| Temperature coefficient | ±3.2 uA/10 °C |
| Maximum on resistance | 200 Ω |
| Minimum off resistance | 50 kΩ |
| Current value when contact is on | IN1: 0.2 mA, IN2: 1 mA |
| Output signal | Dry contact output |
| Maximum load current | 125 mA DC |
| Maximum load voltage | 30 V DC |
| Minimum detection time *4 | 5 ms |
| Maximum input frequency | 100 Hz |
| Counter range | 0 to 999999 |
| Sensing mode*1 | Acceleration, velocity, velocity LPF160 Hz (gain high, gain low) |
| Measurement data | Peak, RMS, peak/RMS |
| Sampling frequency | 1, 2, 5, 10, 20 kHz |
| Sampling points | 1024, 2048, 4096 points |
| Frequency range | 10 Hz to 10000 Hz |
| Range *2*3 | Acceleration: 0 to 300 m/s2. Velocity: 0 to 160 mm/s |
| Accuracy (100 Hz) *4*5 | Acceleration: ±(2% of reading + 2 m/s2). Velocity: ±(10% of reading + 1 mm/s) |
| Sensor power supply voltage | 3.4 V typ. |
| Sensor power supply current | 10 mA max. |
| Conditions | Accuracy (100 Hz) |
| Ambient temperature -40 to 85 ºC, the entire measurement range | Acceleration: -27 to +17% of reading ± 2 m/s2 rms. Velocity: -35 to +25% of reading ± 1 mm/s rms |
| Ambient temperature 25±10 ºC, the entire measurement range | Acceleration: ±(15% of reading + 0.8 m/s2 rms). Velocity: ±(23% of reading + 0.2 mm/s rms) |
| Date | Remarks |
| 2024/12 | Important Notice for Safe Use of Products |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The module collects data from the connected sensors and passes it into the field network through the FN110. The current input spans 0 to 25 mA with a 10 Ω internal shunt and ±16 uA accuracy, and the voltage input accepts 0.1 to 3.2 V. The contact input counts pulses up to 100 Hz over 0 to 999999, and the dry contact output handles 125 mA DC at 30 V DC. For vibration monitoring the module measures acceleration from 0 to 300 m/s2 and velocity from 0 to 160 mm/s over 10 to 10000 Hz, with sampling from 1 to 20 kHz and a sample of 1024, 2048 or 4096 points. The supply to the FN120 is 3.5 V and 50 mA. Operating humidity is 0 to 100%RH non-condensing, vibration resistance 3G and shock resistance 50 G.
How to choose
To choose the FN510, first define the sensor type, 0 to 25 mA current, voltage, contact or vibration sensor. The measurement code depends on it, A with no sensor power or C with power per Table 2. For vibration monitoring check the 0 to 300 m/s2 and 0 to 160 mm/s ranges and the accuracy at 100 Hz. It can send data into the network only together with the FN110.
Request a price and lead time
FN510 Field Wireless Multi-Function Module. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What inputs does the FN510 have?
A 0 to 25 mA current input, a 0.1 to 3.2 V voltage input, a contact counter input up to 100 Hz and a vibration sensor input.
What vibration ranges does the FN510 measure?
Acceleration 0 to 300 m/s2 and velocity 0 to 160 mm/s over 10 to 10000 Hz. Accuracy at 100 Hz is ±(2% of reading + 2 m/s2) for acceleration.
What protection rating and housing material does the FN510 have?
A polycarbonate housing with IP66, IP67 and Type 4X when the connector is tightened properly. It weighs 500 g without bracket, clamp and battery.
Does the FN510 have explosion-protection approvals?
Yes, intrinsically safe approvals FM for the United States or Canada, ATEX and IECEx are listed.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.