FN310 Field Wireless Multi-Protocol Module
Country: · Model: FN310
The FN310 is a field wireless multi-protocol module that, together with the FN110 communication module, acts as a device on a field wireless network. It takes data from a connected sensor and sends it through the FN110. IP66 and IP67 protection applies when the connector is tightened properly.
- Canadian safety standards
- CAN/CSA-C22.2 No.61010-1 CAN/CSA-C22.2 No.94.1, CAN/CSA-C22.2 No.94.2 IEC 60529
- Degrees of protection
- IP66, IP67 and Type 4X apply when the connector is properly tightened.
- Explosion protected types
- FM (United States or Canada), ATEX, IECEx intrinsically safe approval
- Date
- Remarks
Technical specifications
| Canadian safety standards | CAN/CSA-C22.2 No.61010-1 CAN/CSA-C22.2 No.94.1, CAN/CSA-C22.2 No.94.2 IEC 60529 |
|---|---|
| Degrees of protection | IP66, IP67 and Type 4X apply when the connector is properly tightened. |
| Explosion protected types | FM (United States or Canada), ATEX, IECEx intrinsically safe approval |
| Date | Remarks |
| 2024/12 | Important Notice for Safe Use of Products |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The module acts as a bridge between the sensor and the wireless network, while the radio transmission itself is handled by the FN110. Multi-protocol means that sensors with different digital interfaces can be attached to it, although the data do not list them. The housing has IP66, IP67 and Type 4X protection, but only with a properly tightened connector, so this is checked at installation. For hazardous areas, intrinsically safe approvals FM for the United States or Canada, ATEX and IECEx are listed. Canadian conformity is described by the standards CAN/CSA-C22.2 No.61010-1, No.94.1 and No.94.2. A separate important notice for safe use of the products dated 2024/12 is attached.
How to choose
To choose the FN310, compare your sensor interface with the list of supported protocols in the documentation, since this entry does not include it. For analog current and vibration measurement another module of the family is needed. Make sure the FN110 is included and that the approval, FM, ATEX or IECEx, matches your area. The notice dated 2024/12 should be read before installation.
Request a price and lead time
FN310 Field Wireless Multi-Protocol Module. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What does the FN310 module do?
It takes data from a connected sensor and passes it to the field wireless network through the FN110 communication module.
Is the FN110 needed for the FN310 to work?
Yes, connection to the network happens together with the FN110 communication module.
What protection rating does the FN310 have?
IP66, IP67 and Type 4X, but only when the connector is tightened properly.
Which explosion-protection approvals are listed for the FN310?
Intrinsically safe approvals FM for the United States or Canada, ATEX and IECEx. Confirm the exact marking on the nameplate.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.