Gas-Pro (Gas-Pro IR, PID, TK) portable multi-gas detectors for up to 5 gases
Country: United Kingdom · Model: Gas-Pro (IR, PID, TK)
The portable Gas-Pro detector weighs 309–362 g in a 43×130×84 mm housing and measures up to 5 gases at once, oxygen included. The backlit display sits on the top edge, so readings in a manhole, tank or collector can be seen without taking the unit off the clothing.
- Gases
- up to 5: combustible (% LEL), O2, H2S, CO, NH3, Cl2, CO2 and others; Gas-Pro IR – IR combustible channel; Gas-Pro PID – VOC (10.6 eV lamp); Gas-Pro TK – dual IR % vol./% LEL
- Dimensions / weight
- 43×130×84 mm; 309–362 g
- Battery
- Li-ion, over 14 h (13 h with pump), charging 7.5 h
- Sampling
- diffusion or built-in pump (TK – up to 30 m)
Technical specifications
| Gases | up to 5: combustible (% LEL), O2, H2S, CO, NH3, Cl2, CO2 and others; Gas-Pro IR – IR combustible channel; Gas-Pro PID – VOC (10.6 eV lamp); Gas-Pro TK – dual IR % vol./% LEL |
|---|---|
| Dimensions / weight | 43×130×84 mm; 309–362 g |
| Battery | Li-ion, over 14 h (13 h with pump), charging 7.5 h |
| Sampling | diffusion or built-in pump (TK – up to 30 m) |
| Alarm | sound > 95 dB, red/blue LEDs, vibration |
| Data log | 125 h at a 10 s interval (45 000 records), 1000 events |
| Temperature | −20…+55 °C |
| Protection | IP65 and IP67 |
| Explosion protection | ATEX/UKCA II 2 G Ex db ia IIC T4 Gb; IECEx; UL Class I Div 1; INMETRO |
| Other | MED 2014/90/EU; pre-entry check mode PEC; Connect cloud system |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The unit is operated with a single button that is easy to use in gloves, so staff training is minimal. The optional pump is enabled by fitting a flow plate, which the Gas-Pro recognises by itself, and the same unit is worn in diffusion or pumped mode. The Pre-Entry Check (PEC) mode simplifies checking the atmosphere before entering a confined space. The alarm gives over 95 dB at 30 cm (98 dB in loud mode), red and blue LEDs are visible from any angle, and vibration is added. The operating temperature is from −20 to +55 °C, protection is IP65 and IP67, and the unit reminds the user of test and calibration due dates. The II 2 G Ex db ia IIC T4 Gb marking under ATEX/UKCA and IECEx is complemented by UL Class I Division 1 Groups A–D, INMETRO and MED 2014/90/EU compliance for ships.
How to choose
The version is defined by how combustible and organic substances are measured. Gas-Pro IR has an infrared sensor for methane, pentane or propane that does not poison and works at reduced oxygen content, while Gas-Pro PID with a 10.6 eV photoionisation lamp responds to hundreds of volatile organic compounds. Gas-Pro TK is made for purging, degassing and tank servicing, and its dual-range IR sensor switches by itself between % vol. and % LEL. If four standard gases are enough, the lighter T4 at 282 g is the better choice.
Request a price and lead time
Gas-Pro (Gas-Pro IR, PID, TK) portable multi-gas detectors for up to 5 gases. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
Which gases can the Gas-Pro monitor?
Up to 5 gases at the same time, including combustibles in % LEL, oxygen, H2S, CO, NH3, Cl2 and CO2, and the PID version adds volatile organic compounds.
How much data does the Gas-Pro log store?
The measurement log holds 125 hours at a 10 s interval, which is 45 000 records. Separately, 1000 events are recorded, including alarms, over-range, calibrations, tests, switch-ons and TWA.
How long does the Gas-Pro run with the pump on?
With the pump the battery lasts 13 hours, and in diffusion mode over 14 hours. Charging the Li-ion battery takes about 7.5 hours.
How far can the Gas-Pro TK draw a sample from a tank?
The TK version has a pump and a sampling line up to 30 m long, so a sample is taken from deep inside the tank without sending a person down.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.