EA PUL 10000 — industrial electronic loads with regeneration 30/60 kW
Country: Germany · Model: PUL 10000
PUL 10000 industrial regenerative loads absorb 30 kW in a 4U housing or 60 kW in 6U at a voltage of up to 2000 V. They return the absorbed energy to the grid with an efficiency of up to 96 %. The main use is discharging and testing batteries and fuel cells, including full discharge of batteries before disposal.
- Power
- 30 kW (4U), 60 kW (6U)
- Voltage
- 0–80 V … 0–2000 V (4U); 0–360 V … 0–2000 V (6U)
- Current
- up to 1000 A (4U), up to 480 A (6U)
- Regeneration
- energy returned to the grid, efficiency up to 96 %
Technical specifications
| Power | 30 kW (4U), 60 kW (6U) |
|---|---|
| Voltage | 0–80 V … 0–2000 V (4U); 0–360 V … 0–2000 V (6U) |
| Current | up to 1000 A (4U), up to 480 A (6U) |
| Regeneration | energy returned to the grid, efficiency up to 96 % |
| Supply (grid) | 208–480 V 3-phase (4U); 380–480 V 3-phase (6U) |
| Version | 19″, no display, housing depth 668 mm, IP20; water cooling option |
| Standards | EN 61010-1, EN 55011, EN 61326-1 |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The series belongs to the industrial 10000 line; the units have no display and are intended for racks. The 4U version works from 0–80 V to 0–2000 V with a current of up to 1000 A, the 6U version from 0–360 V to 0–2000 V with a current of up to 480 A. Grid connection is 208–480 V 3-phase for the 4U and 380–480 V 3-phase for the 6U. The 19″ housing is 668 mm deep, with an IP20 protection rating and optional water cooling. When a battery is fully discharged before recycling, the energy does not go into resistors but returns to the plant grid. The devices comply with EN 61010-1, EN 55011 and EN 61326-1.
How to choose
For low-voltage batteries and large currents the 4U is chosen, with a lower range limit of 0–80 V and a current of up to 1000 A. High-voltage packs are more convenient to discharge on the 6U with 60 kW. When the battery also has to be charged, take the ready testers BPTS 20920-720 at 180 kW or BMTS 20200-840-2 with two 60 kW channels. For dynamic tests of power electronics there is ELR 21000 up to 1920 kW.
Request a price and lead time
EA PUL 10000 — industrial electronic loads with regeneration 30/60 kW. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What power does the PUL 10000 load absorb?
30 kW in the 4U housing and 60 kW in the 6U housing.
Is PUL 10000 suitable for discharging batteries before disposal?
Yes, this is one of the main uses; the discharge energy returns to the grid with an efficiency of up to 96 %.
What is the voltage range of PUL 10000 6U?
From 0–360 V to 0–2000 V depending on the model, with a current of up to 480 A.
What grid does PUL 10000 run from?
The 4U model from 208–480 V 3-phase, the 6U model from 380–480 V 3-phase.
Can PUL 10000 be installed outside a rack?
The 19″ housing without a display and with an IP20 protection rating is designed for a rack in an indoor room.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.