Ultrimis PRO — industrial ultrasonic water meters DN80–100, R1000, with built-in LoRaWAN / Wireless M-Bus / NFC communication
Country: Poland · Model: Ultrimis PRO
Ultrimis PRO is an industrial ultrasonic water meter for DN80 and DN100 pipelines with a metrological range up to R1000 and a start-up threshold from 20 l/h. It is designed for cold water up to 50 °C at the inlets of large buildings and enterprises, in district metering zones of water utilities and at pumping stations. It transmits data over LoRaWAN and Wireless M-Bus radio channels.
- Type
- ultrasonic water meter (W-Sonic technology), no moving parts
- Models
- ULP80 PRO (DN80, Q3 40 or 63 m³/h), ULP100 PRO (DN100, Q3 63 or 100 m³/h)
- Metrological range
- R1000 / R800 / R400, in any position (H, V)
- Start-up threshold
- from 20 l/h
Technical specifications
| Type | ultrasonic water meter (W-Sonic technology), no moving parts |
|---|---|
| Models | ULP80 PRO (DN80, Q3 40 or 63 m³/h), ULP100 PRO (DN100, Q3 63 or 100 m³/h) |
| Metrological range | R1000 / R800 / R400, in any position (H, V) |
| Start-up threshold | from 20 l/h |
| Temperature class | T50 (cold water up to 50 °C) |
| Working pressure | 16 bar |
| Length / weight | 225 mm / 14.2 kg (DN80); 250 mm / 15.22 kg (DN100) |
| Body / protection | cast iron; IP68 |
| Communication | LoRaWAN, Wireless M-Bus, NFC; remote magnetic-mount antenna with 3 m cable |
| Certification | EU type-examination certificate (per the catalogue card in progress, completion planned for May 2026), PZH approval |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The basis is the patented W-Sonic Technology ultrasonic measurement method, and the measuring chamber has no moving parts, so it does not wear, is insensitive to contamination and needs no scheduled maintenance. The meter is symmetrical, its factor is the same in both flow directions, which makes it possible to monitor reverse flow and detect leaks. It withstands water hammer and the overload flow Q4, is immune to magnetic fields and needs no straight sections. The ULP80 PRO has DN80, Q3 40 or 63 m³/h, a length of 225 mm and a weight of 14.2 kg, and the ULP100 PRO has DN100, Q3 63 or 100 m³/h, a length of 250 mm and a weight of 15.22 kg. The temperature class is T50, the metrological classes R1000, R800 or R400 in any position (H, V), and the working pressure 16 bar. The body is cast iron, the electronics are sealed, and IP68 is standard. A remote magnetic-mount antenna with a 3 m cable brings the signal out of wells and chambers, and NFC is used for local configuration. According to the catalogue card, the EU type-examination certificate was in progress, with completion planned for May 2026, while the website states a EU type-examination certificate and a PZH approval.
How to choose
The model is chosen by size and nominal flow. The ULP80 PRO corresponds to DN80, the ULP100 PRO to DN100. The R1000, R800 or R400 class applies in any mounting position, H or V. The meter is not intended for hot water, its temperature class is T50.
Request a price and lead time
Ultrimis PRO — industrial ultrasonic water meters DN80–100, R1000, with built-in LoRaWAN / Wireless M-Bus / NFC communication. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What metrological range does Ultrimis PRO have?
Up to R1000, and also R800 and R400, with a start-up threshold from 20 l/h.
Are straight sections needed before Ultrimis PRO?
No, straight sections before and after the meter are not needed, and installation is possible in any position.
What communication channels does Ultrimis PRO have?
LoRaWAN and Wireless M-Bus radio interfaces for remote reading and NFC for local configuration.
What are the working pressure and protection rating?
Working pressure 16 bar, cast iron body, sealed electronics with protection rating IP68.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.