EPower — modular thyristor power controller 50–630 A (up to 4000 A in remote version), up to 690 V
Country: United Kingdom · Model: EPower
EPower consists of one control module and up to four power modules. Compact units cover 50–630 A, remote MC units 800–4000 A, and mains voltage reaches 690 V. Typical applications are vacuum and atmospheric furnaces, glass, plastics moulding and autoclaves.
- Rated current
- compact version 50–630 A; remote (MC) 800–4000 A
- Rated voltage
- up to 690 V
- Configurations
- up to 4 power modules per control module: 1–4 independent single-phase loops, 1–2 two-phase, three-phase
- Modes
- phase-angle control, burst firing
Technical specifications
| Rated current | compact version 50–630 A; remote (MC) 800–4000 A |
|---|---|
| Rated voltage | up to 690 V |
| Configurations | up to 4 power modules per control module: 1–4 independent single-phase loops, 1–2 two-phase, three-phase |
| Modes | phase-angle control, burst firing |
| Regulation | by true power, voltage, current; current limiting |
| Loads | constant and variable resistance, short-wave IR emitters, loads through a transformer |
| Diagnostics | load break and partial load break (PLF/PLU), alarms |
| Inputs | analog and logic |
| Communication | Modbus RTU (RS485), Modbus TCP, Profibus, ProfiNet, EtherNet/IP, DeviceNet, CC-Link |
| Network load management | Predictive Load Management (PLM), power sharing between installations |
| Setup | QuickStart, graphical link editor |
Replacement for
ROT-63, ROT-160, ROT-250E (including 700 V version), ROT-630, ROT-630M, ROT-800E, ROT-1400E, ROT-2600E (single-phase control; compact modules 50–630 A, separate-mount version 800–4000 A, up to 690 V)
selected by purpose and main parameters, please confirm with the manager
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
Communication with the PLC runs over the selected fieldbus, and the power modules are mounted in the cabinet next to the load. Available are RS485 Modbus RTU, Modbus TCP, Profibus, ProfiNet, EtherNet/IP, DeviceNet and CC-Link. The Predictive Load Management function distributes power between installations and smooths consumption peaks. The QuickStart wizard speeds up commissioning, and complex schemes are built in the graphical link editor. Analog and logic inputs accept setpoint signals. ROT series controllers from ROT-63 to ROT-2600E, including the 700 V version, can be replaced with EPower loops selected by load current, mains voltage and heater type.
How to choose
First determine the current of each loop. If it does not exceed 630 A, the compact power module is used, and from 800 A the remote version. The number of loops equals the number of power modules per control module, up to four. For currents up to 125 A and voltage up to 500 V the range has the more compact EPack.
Request a price and lead time
EPower — modular thyristor power controller 50–630 A (up to 4000 A in remote version), up to 690 V. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What control modes does EPower have?
Phase-angle control and burst firing with whole cycles. Regulation is by true power, voltage or current with current limiting.
How can EPower be set up quickly?
The QuickStart wizard speeds up commissioning, and the firing mode, load type and number of phases are set in software through the control module.
What load diagnostics does EPower have?
Full and partial load break (PLF/PLU) and alarms.
Which heaters does EPower work with?
Constant and variable resistance heaters, short-wave IR emitters, and also loads through a transformer.
Is there an EPower for 4000 A?
Yes, the remote MC version is made for 800–4000 A, the compact one for 50–630 A.
Similar products
Thyro-SDigital thyristor switch, 1/2/3 phases, 8–350 A, 230–500 VThyro-ADigital thyristor power controller, 1/2/3 phases, 8–1500 A, 230–500 V
REVO C 1PHSingle-phase thyristor power controller, 30–2100 A, up to 1000 V
REVO C 2PH / 3PHTwo- and three-phase thyristor power controllers, 30–2100 A, up to 1000 VREQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.