DIN Rail UPS — DIN rail UPS 500 and 850 VA
Country: France · Model: DIN Rail UPS
The industrial UPS of 500 or 850 VA attaches to a DIN rail right in the automation cabinet. It powers PLCs, robot controllers, conveyor lines and other control devices that must not stop during short mains dips.
- Power
- 500 and 850 VA
- Mounting
- DIN rail
- Output
- approximated sine wave
- Functions
- cold start, wide operating temperature range, surge protection
Technical specifications
| Power | 500 and 850 VA |
|---|---|
| Mounting | DIN rail |
| Output | approximated sine wave |
| Functions | cold start, wide operating temperature range, surge protection |
| Interface | RS232 |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The case is designed for mounting next to circuit breakers and terminals, so a separate shelf or rack is not needed. The output has an approximated sine waveform, which is enough for the switching power supplies of controllers and operator panels. Cold start makes it possible to start the system from the battery when there is no mains. The wide operating temperature range matters for cabinets in workshops with no air conditioning, and surge protection safeguards the electronics when powerful equipment is switched. The RS232 port passes the UPS status to the controller or SCADA so that the process has time to stop correctly.
How to choose
Power is chosen by the sum of consumption of PLCs, I/O modules, panels and switches in the cabinet; the 500 and 850 VA versions cover most local control cabinets. Motors, AC coils and loads sensitive to the voltage waveform are better not powered from an approximated sine wave. For such cases and for 19-inch racks, the online IRIS+ of 1–3 kVA with a sine wave and an output cos φ of 1.0 is suitable.
Request a price and lead time
DIN Rail UPS — DIN rail UPS 500 and 850 VA. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What power does the DIN rail UPS have?
Two versions are made, 500 and 850 VA, and both attach to a standard DIN rail in the cabinet.
What is the output voltage waveform of the DIN Rail UPS?
An approximated sine wave, which suits the switching power supplies of PLCs and panels, but not motors.
Can an alarm signal be passed from the DIN Rail UPS to a PLC?
Yes, the UPS has an RS232 interface through which the controller receives the mains and battery status.
Will the DIN Rail UPS start with no mains?
Yes, the cold start function switches on the output from the battery even when there is no voltage at the input.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.