TriMOD — modular three-phase UPS, 10–80 kW
Country: France · Model: TriMOD
A modular three-phase online UPS rated 10–80 kW, with a parallel system reaching 160 kW. It is assembled from single-phase power modules and holds an output power factor of 1 at up to 96.5 % efficiency. Typical sites are server rooms and data centers where IT loads need N+X redundancy.
- Power
- 10–80 kW; up to 160 kW in parallel
- Output power factor (cos φ)
- 1
- Topology
- online, VFI-SS-11
- Efficiency
- up to 96.5 %
Technical specifications
| Power | 10–80 kW; up to 160 kW in parallel |
|---|---|
| Output power factor (cos φ) | 1 |
| Topology | online, VFI-SS-11 |
| Efficiency | up to 96.5 % |
| Phase configuration | 3/3 or 3/1, single-phase power modules |
| Redundancy | N+X, hot-swappable modules and battery drawers |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504403000 |
| CN code (EU) | 85044095 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
TriMOD is classed as online VFI-SS-11, so output voltage and frequency do not depend on the state of the mains. Because the power modules are single-phase, a three-phase supply can feed either a three-phase output (3/3) or a single-phase one (3/1). The second option helps when the whole protected load is single-phase and splitting it across three phases is awkward. Redundancy sits at two levels, in the modules and in the cabinets. Power modules and battery drawers are hot-swapped while the load stays powered. An output power factor of 1 means the kW rating equals the kVA rating, so the sizing needs no margin for the power factor of IT equipment.
How to choose
Work out the load in kW and add at least one module beyond what is needed, which gives an N+1 layout. Choose 3/3 for three-phase consumers and evenly spread racks, and 3/1 for a single-phase load fed from a three-phase supply. If the total goes past 160 kW, move to Keor MOD+ with 420 and 600 kW cabinets. For emergency lighting and smoke extraction under EN 50171, TRIMOD MCS covers a similar 3–80 kW range.
Request a price and lead time
TriMOD — modular three-phase UPS, 10–80 kW. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How much power can TriMOD reach in parallel?
A single unit delivers 10–80 kW, and a parallel system up to 160 kW. Inside a cabinet, power grows as power modules are added.
Can TriMOD give a single-phase output from a three-phase input?
Yes. Besides 3/3, the 3/1 configuration is supported, built on the same single-phase power modules.
What is the efficiency of TriMOD?
The maker states up to 96.5 % efficiency with the online VFI-SS-11 topology, that is, in double conversion.
Can TriMOD modules be replaced without shutting down the load?
Yes, power modules and battery drawers are hot-swappable. While a failed module is out, the spare modules of the N+X layout carry the load.
How does TriMOD differ from TRIMOD MCS?
TriMOD, rated 10–80 kW, targets IT loads and data centers. TRIMOD MCS, rated 3–80 kW, is built to EN 50171 as a central power system for emergency lighting and safety equipment.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.