Keor SPE RT — line-interactive rack/tower UPS, 750–3,000 VA
Country: France · Model: Keor SPE RT
Keor SPE RT is a 750–3,000 VA line-interactive UPS with AVR and a pure sine wave output, 1U–3U high. The chassis goes into a 19″ rack or stands on the floor as a tower, so the same unit serves a server cabinet or a comms corner with no rack at all.
- Power
- 750–3,000 VA
- Topology
- line-interactive with AVR
- Output waveform
- pure sine wave
- Power factor
- 0.7–0.9 (depending on version)
Technical specifications
| Power | 750–3,000 VA |
|---|---|
| Topology | line-interactive with AVR |
| Output waveform | pure sine wave |
| Power factor | 0.7–0.9 (depending on version) |
| Height | 1U–3U, 19″ rack or tower |
| Interfaces | RS-232, USB, SNMP slot, EPO |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504403000 |
| CN code (EU) | 85044095 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The convertible chassis lets one model work in a rack or as a tower. With the mains in limits, AVR boosts low and trims high voltage without going to battery, so the battery does not burn a cycle on every sag. On battery the output stays a pure sine wave, and server supplies with active PFC ride through the transfer. Power factor is 0.7–0.9 depending on version, so check the load both in watts and in volt-amperes. Batteries are hot-swappable, and external battery packs add autonomy. It talks over RS-232 and USB, with an SNMP card slot for network monitoring and an EPO input for emergency shutdown.
How to choose
Work out the real load in watts and compare it with the power factor of the specific version, since a 3,000 VA unit at 0.7 delivers noticeably fewer watts than one at 0.9. Height grows from 1U to 3U with rating, so reserve the space in the rack plan early. For a couple of PCs or a till with no rack, the Keor Multiplug strip at 600/800 VA is simpler. A 19″ cabinet drawing tens of kilowatts on double conversion calls for the modular Keor MOD RI at 25 or 50 kVA in N+1.
Request a price and lead time
Keor SPE RT — line-interactive rack/tower UPS, 750–3,000 VA. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How tall is Keor SPE RT in a rack?
From 1U to 3U across the 750–3,000 VA range, smaller ratings taking less space.
What output waveform does Keor SPE RT have?
A pure sine wave, with a power factor of 0.7–0.9 depending on version. That output suits server power supplies with active PFC.
What interfaces does Keor SPE RT have?
RS-232 and USB for the server link, an SNMP card slot for network monitoring and an EPO input for emergency shutdown.
Can Keor SPE RT run longer on battery?
Yes, external battery packs connect to it, and hot-swappable batteries keep the load on during replacement.
What does AVR do in Keor SPE RT on a poor grid?
AVR corrects low or high mains voltage without going to battery, which discharges only on a blackout or when voltage leaves the regulation window.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.