Keor FLEX — modular data center UPS up to 1.2 MW
Country: France · Model: Keor FLEX
One Keor FLEX cabinet delivers up to 1200 kW, and a parallel system of such cabinets up to 4.8 MW. This three-phase modular online UPS serves large data centers at up to 98.6 % efficiency in double conversion. Every module is hot-swappable.
- Power
- up to 1,200 kW per cabinet; up to 4.8 MW in parallel
- Efficiency
- up to 98.6 % in double-conversion mode
- Topology
- online, fully hot-swappable modules
- Connection
- cable or busbar, top/bottom entry; TN-C/TN-S
Technical specifications
| Power | up to 1,200 kW per cabinet; up to 4.8 MW in parallel |
|---|---|
| Efficiency | up to 98.6 % in double-conversion mode |
| Topology | online, fully hot-swappable modules |
| Connection | cable or busbar, top/bottom entry; TN-C/TN-S |
| Functions | Smart Grid, remote monitoring |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504403000 |
| CN code (EU) | 85044095 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The high efficiency is reached in double conversion itself, so there is no need to drop to ECO mode and give up full protection to save energy. Service is from the front, so cabinets can stand against a wall or side by side. Built-in predictive diagnostics track component condition before a failure occurs, and a module swap can be planned in advance. Smart Grid functions and remote monitoring send UPS data to the control room. Connection is by cable or busbar, from the top or bottom. The UPS suits TN-C and TN-S earthing systems, which should be confirmed while the switchboard is being designed.
How to choose
Start with the design IT load including growth, since one cabinet covers up to 1200 kW. Above that, cabinets go in parallel up to a system limit of 4.8 MW. If the project needs more, or finer growth steps suit it better, compare with UPSaver, which uses 333 kVA modules and reaches 21 MVA in parallel. For a 420–600 kW hall, Keor MOD+ with 60 kW modules avoids paying for unused capacity.
Request a price and lead time
Keor FLEX — modular data center UPS up to 1.2 MW. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How much power does Keor FLEX deliver in parallel?
Up to 1200 kW in one cabinet and up to 4.8 MW in a parallel system.
What is Keor FLEX efficiency in double-conversion mode?
Up to 98.6 %, and this figure applies to full online protection, not ECO mode.
Which earthing systems does Keor FLEX support?
TN-C and TN-S, with cable or busbar entry from the top or bottom.
Does Keor FLEX need rear access for service?
No, service is from the front, and modules are hot-swapped without shutting down the load.
Can Keor FLEX be monitored remotely?
Yes, it has remote monitoring, Smart Grid functions and predictive diagnostics of components.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.