Multi Power (MPW/MPX) — modular three-phase UPS 45–294 kVA
Country: Italy · Model: Multi Power (MPW / MPX)
Multi Power (MPW/MPX) is assembled from 15, 25 and 42 kW power modules into 45–294 kW cabinets in 3:3 configuration. Power, redundancy level and runtime grow by adding hot-swap power modules and battery units. This modular three-phase UPS is built for data centers and critical loads.
- Power
- 15, 25 and 42 kW power modules; 45–294 kW cabinets; up to 4 cabinets in parallel
- Input/output
- 3:3, 380/400/415 V
- Topology
- modular transformerless online, VFI-SS-111
- Efficiency
- over 96.6 % (online), up to 99 % (ECO)
Technical specifications
| Power | 15, 25 and 42 kW power modules; 45–294 kW cabinets; up to 4 cabinets in parallel |
|---|---|
| Input/output | 3:3, 380/400/415 V |
| Topology | modular transformerless online, VFI-SS-111 |
| Efficiency | over 96.6 % (online), up to 99 % (ECO) |
| Output power factor | 1 |
| Batteries | modular battery units (MPW 170 BTC) or standard battery cabinets |
| Design | 600×1050 mm cabinets, 1200–2000 mm high, IP20 |
| Standards | IEC/EN 62040-1, IEC/EN 62040-2 (cat. C2), IEC 62040-3 |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504403000 |
| CN code (EU) | 85044095 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The supply is 380/400/415 V, the topology is modular transformerless VFI-SS-111 online, and output PF is 1, so the kW rating equals the kVA rating. Efficiency is above 96.6 % online and up to 99 % in ECO. Up to 4 cabinets run in parallel. Batteries go into MPW 170 BTC modular units or into standard battery cabinets when long runtime is needed. Cabinets have a 600×1050 mm footprint and a height of 1200–2000 mm, and IP20 calls for a clean, dry room. Control is through a 7″ touch panel and a built-in web interface. The UPS complies with IEC/EN 62040-1, IEC/EN 62040-2 (category C2) and IEC 62040-3.
How to choose
Pick the module size so the load splits into modules with one to spare. For 50 kW, three 25 kW modules work well, while large halls use 42 kW modules. Cabinet height follows the module count and whether batteries sit inside. If modularity is not needed and the load is 250–800 kVA, use the NextEnergy NXE. Smaller loads that need galvanic isolation suit the Master MPS at 10–200 kVA, and a single-phase output calls for the Sentryum Rack in 1-3:1 with 20 kVA/kW modules.
Request a price and lead time
Multi Power (MPW/MPX) — modular three-phase UPS 45–294 kVA. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What power modules does the Multi Power use?
Hot-swap modules of 15, 25 and 42 kW.
How many Multi Power cabinets can be paralleled?
Up to 4 cabinets, each rated 45–294 kW.
What efficiency does the Multi Power modular UPS reach?
Above 96.6 % online and up to 99 % in ECO.
What are the Multi Power cabinet dimensions?
The footprint is 600×1050 mm and the height 1200–2000 mm depending on version, with IP20.
Where do the Multi Power batteries go?
In MPW 170 BTC modular battery units or in separate standard battery cabinets.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.