IRIS+ / IRISRT / IRIS-RT / IRIS+L online UPS 1–10 kVA
Country: France · Model: IRIS+ / IRISRT / IRIS-RT / IRIS+L
Single-phase double-conversion online UPS units of the IRIS series cover 1–3 kVA (IRIS+, IRISRT) and 6/10 kVA (IRIS-RT, IRIS+L). Control is DSP-based and the output cos φ equals 1.0. They are installed for servers, in data centers, bank branches and telecom equipment.
- Power
- 1–3 kVA (IRIS+, IRISRT), 6/10 kVA (IRIS-RT, IRIS+L)
- Topology
- online double conversion, DSP
- Output cos φ
- 1.0
- Efficiency
- > 92% (1–3 kVA), up to 94% (IRIS-RT)
Technical specifications
| Power | 1–3 kVA (IRIS+, IRISRT), 6/10 kVA (IRIS-RT, IRIS+L) |
|---|---|
| Topology | online double conversion, DSP |
| Output cos φ | 1.0 |
| Efficiency | > 92% (1–3 kVA), up to 94% (IRIS-RT) |
| Parallel operation | N+X (6/10 kVA) |
| Versions | tower, rack/tower (RT) |
| Functions | ECO mode, EPO, cold start, frequency converter mode |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The smaller models have efficiency above 92%, while IRIS-RT at 6/10 kVA reaches 94%. The RT version can equally be mounted in a rack or stand on the floor; the classic tower is more convenient under a desk or in an electrical room. The 6/10 kVA models are combined into an N+X parallel system when the failure of one UPS must not de-energize the load. ECO mode reduces losses where the mains is stable, and the EPO input makes it possible to cut the supply in an emergency from a control panel. Cold start launches the UPS from the battery without mains, which is useful for starting equipment during an outage. The frequency converter mode is needed for consumers rated for a different mains frequency than the one available on site.
How to choose
The model is chosen by load power and installation place. Up to 3 kVA take IRIS+ in a tower case or IRISRT for a rack; at 6/10 kVA there are IRIS-RT and IRIS+L with N+X paralleling. If a light battery with a long service life is needed, look at IRIS-LFP with LiFePO4 for more than 2000 cycles. For a three-phase input and 10–30 kVA, IRIS+T/IRIS+TT is suitable.
Request a price and lead time
IRIS+ / IRISRT / IRIS-RT / IRIS+L online UPS 1–10 kVA. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What is the efficiency of the IRIS+ UPS at 1–3 kVA?
Above 92% in double-conversion mode. IRIS-RT at 6/10 kVA gives up to 94%.
Can IRIS-RT be connected in parallel?
Yes, 6/10 kVA models support N+X parallel redundancy. The number of units sets the required margin in case one of them fails.
What does cold start mean in IRIS UPS units?
It is starting the UPS from the battery when there is no mains. The function is available in the whole 1–10 kVA series.
How does IRISRT differ from IRIS+?
Both series are rated for 1–3 kVA, but IRISRT has a rack/tower version and can be mounted in a rack, while IRIS+ is made as a tower.
What is the output cos φ of the IRIS-RT series?
The output cos φ equals 1.0, so the power in kVA corresponds to the active power in kW.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.