Mizar industrial single-phase UPS 2–10 kVA
Country: Italy · Model: Mizar
The Mizar single-phase industrial UPS of 2–10 kVA operates on the double-conversion principle and has built-in batteries for 20 minutes of autonomy. It supplies automation cabinets, telemetry, communication systems and control desks.
- Power
- 2–10 kVA (BM-2.20…BM-10)
- Phases
- 1-ph. input / 1-ph. output
- Classification
- VFI per EN 62040-3
- Efficiency (AC-AC)
- > 92%
Technical specifications
| Power | 2–10 kVA (BM-2.20…BM-10) |
|---|---|
| Phases | 1-ph. input / 1-ph. output |
| Classification | VFI per EN 62040-3 |
| Efficiency (AC-AC) | > 92% |
| Batteries | built-in sealed lead-acid 12 V (NiCd on request), 20 min autonomy |
| Protection degree | IP20 |
| Interfaces | RS232, RS485, SNMP, CAN (option) |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The VFI class per EN 62040-3 means that the load is supplied from the inverter continuously and does not see mains dips and surges. The battery is made of sealed 12 V lead-acid blocks and is housed inside the enclosure, so a separate battery cabinet is not needed. For sites with harsh operating conditions, nickel-cadmium NiCd batteries are fitted on request. The range is designated BM-2.20…BM-10, with single-phase input and output. For SCADA integration there are RS232 and RS485 ports, network monitoring via SNMP, and CAN as an option. The AC-AC efficiency is above 92%, so even in round-the-clock operation the heating of the cabinet is small. The IP20 enclosure is intended for indoor installation, next to an automation cabinet or in a communications equipment room.
How to choose
Selecting Mizar comes down to two figures: the load power with a margin and the required autonomy time. If the 20 min of the built-in set is not enough, look at Proton for 0.6–10 kVA with 1, 2 or 3 h of autonomy. For three-phase loads or power above 10 kVA move to Futura, with a range up to 800 kVA, and for DC consumers to the UC DC UPS.
Request a price and lead time
Mizar industrial single-phase UPS 2–10 kVA. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How much autonomy time does the Mizar UPS give?
The built-in sealed 12 V lead-acid batteries give 20 min of battery operation.
What is the power of the Mizar UPS?
The BM-2.20…BM-10 range covers 2–10 kVA with single-phase input and output.
How to connect Mizar to a monitoring system?
The UPS has RS232 and RS485, SNMP is provided for network monitoring, and CAN is available as an option.
Can nickel-cadmium batteries be installed in Mizar?
Yes, NiCd batteries are installed on request instead of the standard 12 V lead-acid blocks.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.