Minipower USF / UPX single-phase online UPS 1–10 kVA
Country: Italy · Model: Minipower USF / UPX
The Minipower USF / UPX single-phase online UPS rated 1–10 kVA runs from a 1 phase, 230 V, 50/60 Hz supply on a double-conversion IGBT/PWM circuit. The USF-I version is supplemented with an isolation transformer for medical diagnostics. It is intended for medical, IT and telecom systems.
- Power
- 1–10 kVA
- Phases
- 1 phase, 230 V, 50/60 Hz
- Topology
- online, double conversion, IGBT/PWM
- USF-I version
- with isolation transformer for medical diagnostics
Technical specifications
| Power | 1–10 kVA |
|---|---|
| Phases | 1 phase, 230 V, 50/60 Hz |
| Topology | online, double conversion, IGBT/PWM |
| USF-I version | with isolation transformer for medical diagnostics |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The online topology with double conversion means that the load is fed through the inverter all the time rather than straight from the mains. This circuit separates the consumer from mains disturbances, and the power stage is built on IGBTs with PWM. The 1–10 kVA range sets the limits for single-phase 230 V loads at 50/60 Hz. The USF-I version carries an isolation transformer needed for medical diagnostics and adds galvanic isolation between the mains and the equipment. The data name medical, IT and telecom systems as the fields of use, that is, places where power is needed without interruption.
How to choose
Selection starts with the load power within 1–10 kVA and a single-phase 230 V supply. For medical diagnostics the USF-I version with an isolation transformer is taken. If the input is three-phase, the output single-phase and 6.5–20 kVA is needed, look at the Minipower UPH. For a three-phase UPS of 10–200 kVA there is the Steropower UPG.
Request a price and lead time
Minipower USF / UPX single-phase online UPS 1–10 kVA. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What topology does the Minipower USF / UPX UPS use?
Online, double conversion, IGBT/PWM. The load is fed through the inverter all the time.
What power and voltage is the Minipower USF / UPX built for?
Power is 1–10 kVA on a single-phase network, 1 phase, 230 V, 50/60 Hz.
What is different in the USF-I version?
The USF-I version is supplemented with an isolation transformer needed for medical diagnostic systems.
Which systems is this UPS intended for?
For medical, IT and telecom systems with a single-phase 230 V supply.
What to take if more than 10 kVA is needed?
For a three-phase input and single-phase output at 6.5–20 kVA there is the Minipower UPH, and for a three-phase UPS of 10–200 kVA the Steropower UPG.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.