EV Charging Station — EV charging station 22 kW
Country: Netherlands · Model: EV Charging Station
This wall-mounted AC EV charger delivers up to 22 kW on 3 phases or 7.3 kW on 1 phase. It integrates with solar systems and ESS and can charge the car from surplus solar power that would otherwise flow to the grid.
- Power
- 22 kW AC (3-phase) / 7.3 kW (1-phase)
- Ingress protection
- IP44
- Control
- 4.3″ touchscreen, Wi-Fi, Bluetooth
- Modes
- manual, automatic (from solar surplus), scheduled
Technical specifications
| Power | 22 kW AC (3-phase) / 7.3 kW (1-phase) |
|---|---|
| Ingress protection | IP44 |
| Control | 4.3″ touchscreen, Wi-Fi, Bluetooth |
| Modes | manual, automatic (from solar surplus), scheduled |
| Customs codes (for reference) | |
| HS code | 8537.10 |
| UKTZED code (Ukraine) | 8537109890 |
| CN code (EU) | 85371098 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The enclosure is rated IP44, so the station mounts on the wall of a garage, car park or a sheltered facade. Control runs from a 4.3″ touchscreen, over Wi-Fi or Bluetooth. There are three operating modes. In manual mode the user sets the current, while in automatic mode the station uses only surplus solar power and follows changes in generation. On a schedule it charges during set hours, for example overnight on a cheaper tariff. Generation and consumption data come from the system controller, which in an ESS is a Cerbo GX or Ekrano GX. Actual power also depends on the car’s onboard charger, and many vehicles draw less than the station rating on 1 phase.
How to choose
The supply decides. A three-phase connection gives the full 22 kW, while on single phase the station is limited to 7.3 kW, usually enough for overnight charging. Before installation check the spare capacity of the supply and the feeder cross-section, since the station becomes the largest load in the house for hours at a time. If the goal is charging from the panels, the system needs a GX controller and an ESS inverter, with the panels connected through a SmartSolar MPPT or a grid-tied inverter.
Request a price and lead time
EV Charging Station — EV charging station 22 kW. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What power does the EV Charging Station deliver on one phase?
7.3 kW on 1 phase and up to 22 kW on 3 phases.
Can the station charge an EV from solar power only?
Yes, in automatic mode it uses surplus solar power and adjusts the current to generation.
What is the ingress protection rating of the EV Charging Station?
IP44, and the station mounts on a wall, under a canopy if outdoors.
How is the charging station controlled?
From the 4.3″ touchscreen on the unit, over Wi-Fi or Bluetooth. Modes are manual, automatic and scheduled.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.