KSTAR Distributed DC charging system, 360–720 kW

Name: Distributed DC charging system, 360–720 kW
Brand: KSTAR

Supplied as an official KSTAR partner

Manufacturer: KSTAR · China · Model: DC 360–720

The distributed DC charging system is rated 360–720 kW and supports from 1 to 12 connectors. It consists of a power unit and remote terminals, so it suits charging hubs with limited space. Efficiency reaches 96 %.

Power: 360–720 kW
Connectors: 1–12
Efficiency: up to 96 %
Cooling: liquid-cooled connector

Request a quote All specifications

Technical specifications

Power	360–720 kW
Connectors	1–12
Efficiency	up to 96 %
Cooling	liquid-cooled connector
Design	power unit + terminals (terminal footprint is 1/4 of the usual)

Specifications are taken from the manufacturer’s technical documentation. Updated 11/06/2026.

Description

The power unit stands apart, and only compact terminals are installed at the parking spaces. The terminal footprint is a quarter of the usual, so more posts fit on a hub with a tight layout. The connectors are liquid-cooled, which holds down heating at high currents. The system is sized to the number of simultaneous charging sessions, and efficiency of up to 96 % reduces heat losses in the power unit. The 360–720 kW range makes it possible to start with a smaller configuration and add connectors up to 12 as needed. The scheme suits car parks, parking lots, freight vehicle terminals and city hubs, where space is expensive and a lot of power is needed.

How to choose

Start from the number of cars connected at the same time and the power needed per post. For a hub of a few spaces the lower limit of 360 kW will do, for large fleets and freight vehicles up to 720 kW. The number of connectors, from 1 to 12, sets how many terminals you connect to one power unit. If you need a solution without remote terminals, consider the other charging stations in this catalog.